Thứ Bảy, 24 tháng 9, 2011

Bán Spacy Nhật xịn đời 2001 chính chủ

mình có bà bá nhờ giao bán 1 em Sbacy nhật xịn, mua và đăng ký chính chủ năm 2001, nay có nhu cầu bán lên oto

mình giao hộ bá thôi, ai có nhu cầu thì tham khảo, yên tâm xe chính chủ, ko qua bất kỳ trung gian nào, xe hoàn toàn là nữ sử dụng

xe đã đi đc 4vạn.

xe hiện đang ở Phú thọ,

LH.0986677342

* Nghe nhạc
* Du lịch - khách sạn
* Bản tin du lịch
* Máy tính laptop
* Thời trang
* Rao vặt

Cho thuê nhà 7 tầng, gần đường Lê Đức Thọ

Hiện nay tôi có căn nhà 7 tầng mới xây, diện tích 110m2 x 7. Nội thất xịn, điều hòa trung tâm, có cầu thang máy. Vị trí nằm gần sát đường Lê Đức THọ kéo dài. Ai có nhu cầu thuê hoặc làm nhà ở xin liên hệ Mr Toàn sđt 0947.879.886

* Nghe nhạc
* Du lịch - khách sạn
* Bản tin du lịch
* Máy tính laptop
* Thời trang
* Rao vặt

Cho thuê nhà số 219 nguyễn ngọc vũ, trung hòa, cầu giấy, hà nội

Nhà 219 Nguyễn Ngọc Vũ, Trung Hòa, Cầu Giấy, Hà Nội có:

- Diện tích mặt bằng: 70m2, xây 5 tầng, mặt tiền 4m

- Mỗi tầng có 01 nhà vệ sinh, tầng thông, không chia phòng

- Giá cho thuê toàn bộ nhà: 1600USD/tháng

- Giá cho thuê từng tầng:

Tầng 1, tầng 2, tầng 3: 9 triệu/ tầng/ tháng

Tầng 4: 8 triệu/tầng/tháng

Tầng 5: 7 triệu/tầng/tháng

- Đóng tiền: 6 tháng/lần

Hiện nhà đang trong giai đoạn hoàn thiện, cuối tháng 9/2011 bàn giao nhà

Anh, chi hay quý cơ quan có nhu cầu xin liên hệ:

- Anh Bình: 0913037531

- Chị Nguyệt: 0983817605

 

* Nghe nhạc
* Du lịch - khách sạn
* Bản tin du lịch
* Máy tính laptop
* Thời trang
* Rao vặt

Bán biệt thự Quang minh

Bán BT đường Hoa Ngọc Lan KĐT Quang Minh Mê linh HN,380m2 xây thô 3 tầng đường 15m hướng Tây Nam. Giá thoả thuận.
Sổ đỏ chính chủ.
LH:0912856086

* Nghe nhạc
* Du lịch - khách sạn
* Bản tin du lịch
* Máy tính laptop
* Thời trang
* Rao vặt

Thứ Sáu, 23 tháng 9, 2011

Cần đổi xe Exiter côn thường lấy côn tay bù tiền đây


Mình cần đổi 1 chiếc Exitet côn thường lấy chiếc côn tay mình bù tiền nha ai ccaanf đổi liên hệ hoặc bán giá mềm chút cho xin cái gia lun lh:0935230506 yahoo:love_story_dn90(Hưng). LH: 0935230506

Bán nhà MT Điện Biên Phủ

Loại bất động sản:Nhà phố
Giá bán:5,250,000,000/Tổng diện tích
 
Tổng diện tích:- m2Phòng ngủ:-
Diện tích xây dựng:- m2Phòng tắm:-
Diện tích sử dụng:- m2Tổng số phòng:-
Năm xây dựng:-Vị trí tầng:-
Năm sửa chữa:-Tổng số tầng:-
 
Nội thất:
Các tiện nghi:
Hướng:
Đường trước nhà:Không xác định
Chính chủ:-
Thuộc dự án:
alternateRow('#classifiedExpand',false,true);var map_title='';map_position='';
Bán nhà MT Điện Biên Phủ, DT 4,8x15m, khu sầm uất, 1,5mê. Giá 5,25tỷ.LH: 0914012456

Bán máy đếm tiền giá rẻ - hl 2100uv- call0917 321 606

Sản phẩm mới HL-2800 UV

 

*  Đếm hoàn toàn tự động, tự dừng khi đếm hết tiền

*  Đồng hồ hiển thị mặt số lớn & 1 mặt số kéo dài

*  Đếm theo mẻ, cộng dồn theo ý muốn.

*  Đếm được tất cả các loại tiền giấy & Polymer

*  Mặt đồng hồ Oled có thể xoay tròn được

*  Máy đếm êm và cực kỳ chính xác

 

Liên Doanh Đức + Trung Quốc

 

Nhượng QSD đất * DTĐ: 5x20m = 100m2, MT Chương Dương (ven sông Nam Trần Thị Lý), Q. Ngũ Hành Sơn.*


Nhượng QSD đất
* DTĐ: 5x20m = 100m2, MT Chương Dương (ven sông Nam Trần Thị Lý), Q. Ngũ Hành Sơn.
* Giai đoạn 2 Nam Việt Á (gần giai đoạn 1), 2 mặt tiền 7,5m, DT: 7,5x20m = 150m2.
Giá TL.
Liên hệ chính chủ: 0905122331

HYUNDAI ACCENT ■ Hyundai 1,25 tấn, đời 99, màu xanh, đăng ký trùng khớp, biển 29V. Tel. 0913581815


■ Hyundai 1,25 tấn, đời 99, màu xanh, đăng ký trùng khớp, biển 29V. Tel. 0913581815.
■ Hyundai 1 tấn, đời 1999; 4 xe Hyundai 1,25 tấn, đời 2005, 2008, 2001, 2006, nguyên bản. LH: Ngọc, Tel. 0903212181, 0904488756.
■ County 29C, SX 2009, màu đồng vàng, BKS 30S-62xx. LH: Chiến, Tel. 0904110268

Chủ Nhật, 24 tháng 4, 2011

Sony Vaio VPCZ138GG

Hello



I just upgrade from VGN SZ79N to VPC Z138GG

I'm very happy with the new cazy power laptop.



But now I have some problem with my vaio

I need to split the partion to 2 drives. and i need to install windows 7 ultimate clean install.



Then when I install new windows I delete the OEM partion.

Now my vaio not stable and i need to restore to factory default.

But when I boot to recovery mode by Assist button it not going to recovery mode but it boot to the windows.



I can't restore to factorey default any more.

And body can help me to find the recovery disk please?



Thank you all

Reply 1 : Sony Vaio VPCZ138GG

If you did not make a set of recovery discs before doing what you've mentioned, then unfortunately, you'll have to contact Sony to buy a set of recovery discs from them.



Good luck.

Reply 2 : Sony Vaio VPCZ138GG

You should be able to find the DVDs for Win7 online, then use the serial number from your Z to activate it. The drivers specific to the Z can be found on Sony's support site.



Edit: Oops, didn't realize you are already using the Win Ultimate disks. Anyway, downloading the drivers from Sony should bring it pretty much to the same state.

Reply 3 : Sony Vaio VPCZ138GG


Quote:








Originally Posted by SPEEDwithJJ
View Post

If you did not make a set of recovery discs before doing what you've mentioned, then unfortunately, you'll have to contact Sony to buy a set of recovery discs from them.



Good luck.



correct!! i too is looking for recovery discs for my Z11..

Reply 4 : Sony Vaio VPCZ138GG

If anyone has hosting space, I am willing to upload the images of the recovery discs for the VPCZ1388GG.

Reply 5 : Sony Vaio VPCZ138GG


Quote:








Originally Posted by SPEEDwithJJ
View Post

If you did not make a set of recovery discs before doing what you've mentioned, then unfortunately, you'll have to contact Sony to buy a set of recovery discs from them.



Good luck.



Don't know what Sony charges, but I've never seen a mfr charge more than $20, and I think they are the safest bet.

Reply 6 : Sony Vaio VPCZ138GG


Quote:








Originally Posted by ota-con
View Post

If anyone has hosting space, I am willing to upload the images of the recovery discs for the VPCZ1388GG.



Thank you so much.

can you upload via



Free File Hosting - Online Storage; Upload Mp3, Videos, Music. Backup Files

Reply 7 : Sony Vaio VPCZ138GG


Quote:








Originally Posted by mollis
View Post

Thank you so much.

can you upload via



Free File Hosting - Online Storage; Upload Mp3, Videos, Music. Backup Files



that says 5GB max... win ultimate partition is like 15GB? I don't think compressing will be that much less. I think the best option will be to get a file of Win 7 ultimate then just install that and update drivers accordingly

Reply 8 : Sony Vaio VPCZ138GG

So F10 at bootup doesn't work? I messed up my factory installation reset once on a sony and was hitting my head on the wall with messed up applications until I tried that by chance and voila, I am good now. I think the data remains there unless you do a secure clean using a program.

Reply 9 : Sony Vaio VPCZ138GG


Quote:








Originally Posted by shriek11
View Post

So F10 at bootup doesn't work? I messed up my factory installation reset once on a sony and was hitting my head on the wall with messed up applications until I tried that by chance and voila, I am good now. I think the data remains there unless you do a secure clean using a program.



The OP wiped the recovery partition that's why he/she's asking for a copy of it. But otherwise, on the Vaio Z, pushing the "ASSIST" key will do the same thing: cause the Z to boot into recovery/diagnostic mode.

Sumsung LED TV not supporting MKV & Divx formats

Hi i have purchased samsung LED 55 cms Serial 4 TV now i am having pen drive not supporting TV

MKV format & Divxs not support my TV ??

Reply 1 : Sumsung LED TV not supporting MKV & Divx formats

You have the old subtilte inside the mkv issue and then you progress to encodings that don't work.

The advice is simple. Use any encoding that does work. You can lose a lot of time on this or you can re-encode.
Bob

B1930N Screen Flicker

I may occasionally get some vertical screen flickering (ie. a few lines down the screen) and the whole pc jams.

Was wondering if this is due to the monitor vga cables not being connected properly, or is this a hardware fault, or is this a Samsung monitor issue...

Reply 1 : B1930N Screen Flicker

"the whole PC jams"?

Kees

Reply 2 : B1930N Screen Flicker

Yes and I have to hard boot the pc as the screen problem freezes the operating system.

Reply 3 : B1930N Screen Flicker

Unlikely a freeze of the OS is caused by anything (such as a cable or a monitor). So it's something inside the case. Could be videocard or the driver. If it's onboard video (on the motherboard, not a separate card) it could be bad RAM also.

Kees

Reply 4 : B1930N Screen Flicker

Thanks for these leads. I ran Memtest86+ from a live Ubuntu cd and it showed some RAM errors, so I'm guessing I should ask the supplier for replacement memory?

Do you know of any good and free software that tests motherboard components?

3 Weeks for shipping? It will take a month to deliver!

Hi guys, I just ordered the T520 21th April, seems like it will be shipped 12th May. It's 3 weeks!!! I wonder how long does it take for you guys?



BTW, I wonder why there is not many people here having T520, it is a much cheaper W520 with FHD screen. Why pay more for its AutoCAD discrete card?

Reply 1 : 3 Weeks for shipping? It will take a month to deliver!


Quote:








Originally Posted by tonmey
View Post

Hi guys, I just ordered the T520 21th April, seems like it will be shipped 12th May. It's 3 weeks!!! I wonder whether how long does it take for you guys?



BTW, I wonder why there is not many people here having T520, it is a much cheaper W520 with FHD screen. Why pay more for its AutoCAD discrete card?



I ordered a w520 on the 19th Originally said estimated ship date of may may 4 changed to may 2 today. Only changes on the default quad core mchine were 1 dimm instead of 2 quadro 2000 and intel centrino ultimate.

Reply 2 : 3 Weeks for shipping? It will take a month to deliver!

Ordered an x120e on 4/14. Original estimated shipping date was 4/28, but they moved me back to 5/4. =

I picked the E-240 $399 base config and upgraded the CPU to E-350 for $40. With the CPU upgrade it's exactly the same as the $450 E-350 config.

Reply 3 : 3 Weeks for shipping? It will take a month to deliver!


Quote:








Originally Posted by LeafHater
View Post

I ordered a w520 on the 19th Originally said estimated ship date of may may 4 changed to may 2 today. Only changes on the default quad core mchine were 1 dimm instead of 2 quadro 2000 and intel centrino ultimate.



Well, you did change the graphics card, I guess it takes some time. I am thinking my FHD screen takes some time.

Reply 4 : 3 Weeks for shipping? It will take a month to deliver!

I ordered a T420 with Optimus graphics on 4/13. Original estimated shipping date was 4/26. It shipped out on 4/19 and should make it to my door by 4/26.



Generally, Lenovo's site gives the long estimate. I'm sure they do this because sometimes parts shortages or high demand can change ship times, and they'd rather give you that long estimate and deliver faster than fail to meet a date they've given at time of order.



Occasionally, they push back the ship date too. Usually this is due to unforeseen circumstances, like a supply-chain problem (just as an example, what if an important part comes from an area of Japan hit by the earthquake/tsunami?)



They do take longer than Dell --but Dell has assembly plants in North America, benefiting US/Canadian/Mexican customers, and Lenovo does not.

Reply 5 : 3 Weeks for shipping? It will take a month to deliver!

I ordered 2 T420's with base config but with an upgraded screen 2 days ago and I have a estimated ship time of 5/17

Reply 6 : 3 Weeks for shipping? It will take a month to deliver!


Quote:








Originally Posted by LoneWolf15
View Post

I ordered a T420 with Optimus graphics on 4/13. Original estimated shipping date was 4/26. It shipped out on 4/19 and should make it to my door by 4/26.



Talk about timing! I should get my T420 on that date too though I ordered mine on the 15th April. It's currently being departed from Hong Kong now, maybe we can compare to each others T420 once it arrives on our doorstep!

Reply 7 : 3 Weeks for shipping? It will take a month to deliver!


Quote:








Originally Posted by Hearst555
View Post

Talk about timing! I should get my T420 on that date too though I ordered mine on the 15th April. It's currently being departed from Hong Kong now, maybe we can compare to each others T420 once it arrives on our doorstep!



Mine's just left Anchorage, Alaska. I had figured on it taking longer through US Customs there, but it was only a day, so it will likely make it on the 25th now.



Since I have this Friday off, I'm going to be spending some of my free time backing up the data from my T400 to get ready.

Reply 8 : 3 Weeks for shipping? It will take a month to deliver!


Quote:








Originally Posted by LoneWolf15
View Post

Mine's just left Anchorage, Alaska. I had figured on it taking longer through US Customs there, but it was only a day, so it will likely make it on the 25th now.



Since I have this Friday off, I'm going to be spending some of my free time backing up the data from my T400 to get ready.



Customs takes place in KY. It will go from AK to KY, where it will stay a day (at least in my case), that next day it will go through customs and to your state. Overall with standard shipping it took 3 or 4 days to get from HK to IL

Reply 9 : 3 Weeks for shipping? It will take a month to deliver!


Quote:








Originally Posted by thecrafter
View Post

Customs takes place in KY. It will go from AK to KY, where it will stay a day (at least in my case), that next day it will go through customs and to your state. Overall with standard shipping it took 3 or 4 days to get from HK to IL



I thought it could take place in either. US Customs does have a location in Anchorage. I could be incorrect, though.



3-4 days is an improvement over my last two ThinkPads by about a day or two. Most of that delay was in Customs. I didn't order at peak traffic times (generally early to mid summer), so perhaps Customs has gotten more efficient.

Toshiba recovery disk - What all does it erase

I have a qosmio X505-Q892, and from past couple of days windows is acting up. I feel I may have to use my "System restore" discs I created when I bought the laptop.



I have a few questions regarding that.

1. What is the procedure- Do I simply boot from the first disk and follow instructions

2. What all gets erased - Toshiba says all my programs and windows and files will get erased. I understand C drive my get formatted. But I have 4 partitions C drive has windows and few programs, E drive has photos and documents F drive has all programs installed, and G has videos and media files. So will it just erase drive C, or erase all the partitions? Is there a way where I can simply erase my programs and C drive, and keep my data and media intact?

Reply 1 : Toshiba recovery disk - What all does it erase

Reformat with disks:



-Insert Disk #1

-turn off lappy

-turn on lappy

-press F12 while powering on

-select cd/dvd boot

-press enter follow prompts



I've only used the option to restore the pc to factory settings (like you just took it out of the box). So, this option erases EVERYTHING.



I've never used any other option.



Good Luck

Dell XPS 15 L501X Will I see a difference?

Hello, I'm new here and found this forum on google, And sorry if this a Re-post but I did search here before posting but couldn't find a answer that i could understand lol..



I'm a Graphic Design Artist and Video Editor And I see this Dell XPS 15 I would like to buy for $995.00. I'm going to be doing some heavy video editing at 60fps with Adobe Premiere, Or photoshop but not all at once, The only thing that is going to be running in the background is Skype and Few internet browsers and itunes, I was scared when I looked at the Processor only being 1.73GHz until i read about the 2.93GHz Turbo Mode it kicks to when I need more apps open, I'm not sure how that works.



Will I see a difference between a



Intel Core i7-740QM Quad Core Processor 1.73GHz (2.93GHz Turbo Mode)



And



Intel Core i7-840QM Quad Core Processor 1.86GHz(3.2GHz Turbo Mode)



I am on a budget and the Intel Core i7-840QM is $150 more and it's only 720p display, when the Intel Core i7-740QM is 1080p..



So you lose and gain lol..



So I would love the Intel Core i7-740QM Quad Core Processor 1.73GHz (2.93GHz Turbo Mode) with the 1080p display. But i would hate to regret it if the Processor ends up being to slow.



Thx..

Reply 1 : Dell XPS 15 L501X Will I see a difference?

The processor should be fine. The bigger and better the screen, the easier it is to edit. Do you know if this is a RGB LED screen?



Passmark scores:



Intel Core i7-840QM

3835



Intel Core i7-740QM

3586



Only a 249 point difference...

Reply 2 : Dell XPS 15 L501X Will I see a difference?

It states



Silver Anodized Aluminum 15.6" FHD (1080p) B+RGLED Display with 2.0 MP webcam



Is that good or bad ?

Reply 3 : Dell XPS 15 L501X Will I see a difference?


Quote:








Originally Posted by Smooth_J
View Post

The processor should be fine. The bigger and better the screen, the easier it is to edit. Do you know if this is a RGB LED screen?



Passmark scores:



Intel Core i7-840QM

3835



Intel Core i7-740QM

3586



Only a 249 point difference...





It states



Silver Anodized Aluminum 15.6" FHD (1080p) B+RGLED Display with 2.0 MP webcam



Is that good or bad ?

Reply 4 : Dell XPS 15 L501X Will I see a difference?


Quote:








Originally Posted by Brandenlee87
View Post

It states



Silver Anodized Aluminum 15.6" FHD (1080p) B+RGLED Display with 2.0 MP webcam



Is that good or bad ?



Congrats, you got the awesome screen =D

Reply 5 : Dell XPS 15 L501X Will I see a difference?

The 740QM is not a slow processor. It'll be just fine



The screen makes much more of a difference than the processor, so I'd go for whichever one has got the 1920x1080 B+RGLED display.



Also I'd recommend comparing the price of an older XPS 15 with that of a new XPS 15 with the i7-2630QM and the 1080p display, to decide which one's a better deal.



If you're in the USA:

http://configure.us.dell.com/dellsto...l_id=xps-l502x

Use coupon code 932N$0ZCCHWZB9 for $70 off.

Use coupon code HLSKSR06S9ZG0F for free shipping.

i7-2630QM (faster than i7-840QM)

1920x1080 B+RGLED display

$929 with coupon codes

Reply 6 : Dell XPS 15 L501X Will I see a difference?

If you can get the new XPS 15 then the i7 2630QM would be WAY faster than even the i7 840QM.

Reply 7 : Dell XPS 15 L501X Will I see a difference?


Quote:








Originally Posted by seigi009
View Post

If you can get the new XPS 15 then the i7 2630QM would be WAY faster than even the i7 840QM.



But he won't really be able to feel the performance difference. the only difference will be battery life as earlier i7 did not support switchable graphics. I expect around 2-3 hrs of battery life on the i7 740qm

Reply 8 : Dell XPS 15 L501X Will I see a difference?

~2 hours with the 6 cell, ~3 with the 9 cell

Reply 9 : Dell XPS 15 L501X Will I see a difference?

Alright Thx..



So you guys are saying I'll be just fine with the Intel Core i7-740QM Quad Core Processor 1.73GHz (2.93GHz Turbo Mode)?



Here's the rest of the specs..



DELL XPS 15



New Generation XPS



Intel Core i7-740QM 1.73ghz Quad



(2.93GHz Turbo Mode/6MB cache)



6GB, DDR3, 1333MHz 2 Dimm

2GB NVIDIA GeForce GT 435M graphics

Integrated Tv Tuner



500GB 7200RPM Hard

Drive



Silver Anodized Aluminum 15.6" FHD (1080p) B+RGLED Display with 2.0 MP webcam



Intel Centrino Advanced-N 6200



Blu-ray Disc BD-Combo (Reads BD and Writes to DVD/CD)



Microsoft Windows 7 Home Premium



Integrated Webcam



Integrated Dell Bluetooth



9 CELL BATTERY

G53JW-XA1: Cannot disable post screen!

Hello everybody,

As I'm new to this forum, i beleive somebody or a G53JW user can help me, i'm a programmer and just bought a Asus G53JW-XA1 from Costco, it looks glossy and fine though i found out something that i disliked too much, here it is:



I searched everywhere in BIOS (vesion 209) and there's no option to disable POST splash screen during boot up, there's only option to change splash screen to animated type or to still image type.



I downloaded the EManual documention of the notebook and though it says:



If you press [Tab] during the splash screen, standard boot information such as the BIOS version can be seen.



...that's not true! I'm not able to get classic POST screen which shows all the happenings about hardware during boot up. Though i hit TAB, logo still displayed.



Is there anybody noticed this issue with G53JW-XA1?



All the best,



Thanks!

Reply 1 : G53JW-XA1: Cannot disable post screen!

Welcome to the forum, DO you mean the list of drivers displayed when you boot to safe mode? (F8 after post)

Have U tried any of the boot options in MSconfig?

I think this is a windows parameter not a BIOS setting.

Have you ever been able to get the info you want on startup with a windows 7 machine?



BTW are you trying to trouble shoot a problem or is this just your preference?

Reply 2 : G53JW-XA1: Cannot disable post screen!


Quote:








Originally Posted by JOSEA
View Post

Welcome to the forum, DO you mean the list of drivers displayed when you boot to safe mode? (F8 after post)

Have U tried any of the boot options in MSconfig?

I think this is a windows parameter not a BIOS setting.

Have you ever been able to get the info you want on startup with a windows 7 machine?



BTW are you trying to trouble shoot a problem or is this just your preference?



Hello, i mean the POST (power-on self-test) screen which displays information about peripherals and hardware when you first power on the PC just like every computer and motherboard report before starting loading Windows. Windows 7 can boot just fine.



I and any normal computer user want to see this detailed POST screen (sample) ->

http://biorobots.cwru.edu/server/how.../post/post.jpg



Asus totally forgot to include disabling POST screen image in G53JW-XA1, or please let me know how to see actual POST (BIOS) screen during boot up.



And yes, it's a problem! Not preference, what am i supposed to do without seeing actual POST screen (but with Asus splash logo) if a hardware error occurs in future? Asus must have thought that!



Thanks!

Reply 3 : G53JW-XA1: Cannot disable post screen!

It's usually called quiet boot (disable) and I think they left it out on the G73 too.



You can just Esc to see the POST messages.

Reply 4 : G53JW-XA1: Cannot disable post screen!

There has to be a hidden hotkey somewhere, unless ASUS wants their techs to have a hell of a time troubleshooting whats wrong.

Reply 5 : G53JW-XA1: Cannot disable post screen!


Quote:








Originally Posted by ALLurGroceries
View Post

It's usually called quiet boot (disable) and I think they left it out on the G73 too.



You can just Esc to see the POST messages.



I thought the same but there's no option like "quiet" or "silent" boot to disable.



When you press Esc, it only lists available drives to boot from. Not the POST screen.

Reply 6 : G53JW-XA1: Cannot disable post screen!

If you catch it early Esc will show you the post screen... unless I'm remembering incorrectly. It's been a while.

Reply 7 : G53JW-XA1: Cannot disable post screen!


Quote:








Originally Posted by frosty5689
View Post

There has to be a hidden hotkey somewhere, unless ASUS wants their techs to have a hell of a time troubleshooting whats wrong.



yep frosty,but IMHO Asus mustn't let us taste this pain...It's not acceptable not to have an option to see actual POST screen, as i'm a bit experienced about computers, this is the first computer i've seen without any option to disable splash screen. I've used to work with Asus mobos but all of them have at least one option to disable fancy boot logo in BIOS, even i'm consent to have this ability on boot up by pressing TAB, but no avail.




Quote:








Originally Posted by ALLurGroceries
View Post

If you catch it early Esc will show you the post screen... unless I'm remembering incorrectly. It's been a while.



As i stated, pressing ESC only shows list of devices to boot from, not detalied POST screen. Sometimes i'm asking myself, did i do right by buying a gaming notebook whilst my main purpose is programming (software development)



Any additional help by any forum user (or any G53JW-XA1 owner) is greatly appreciated!



I'm still in shock, how can Asus forget to implement disabling POST screen logo? Oh no...

Thứ Năm, 21 tháng 4, 2011

Tired of how frictiony your Asus UL-XX touchpad is?

Well, I was. The touchpad on the UL30a literally the worst part of an otherwise AAA laptop. So I looked around and discovered "touchpad protectors". They are very similar to screen protectors to phones (actually, I can't really tell a difference). I found free + shipping ones from here and they work like a charm! The material is matte, as far as I know. Leaves no fingerprints and there is almost no friction. Great to the touch. Now I am VERY satisfied with this laptop!



Part # for a CF-19 Rubber, Backlit Keyboard?

Could someone please let me know if the part # for a CF-19 Rubber, Backlit Keyboard is:



N860-1434-T101/20



Also, would it be a CF-WBKB191VM? I believe it came from a MK 3. Do MK 3 Keyboards fit on ALL CF-19's?



Pictures are below.







Reply 1 : Part # for a CF-19 Rubber, Backlit Keyboard?

I believe all CF19 and 18 keyboards fit all MK versions.



Jason

Reply 2 : Part # for a CF-19 Rubber, Backlit Keyboard?


Quote:








Originally Posted by kb9kst
View Post

I believe all CF19 and 18 keyboards fit all MK versions.



Jason



Are the part #'s I mentioned, correct?

Reply 3 : Part # for a CF-19 Rubber, Backlit Keyboard?

Panasonic is very arbitrary with their part numbers. They seem to randomly change them when they get in new shipments. As kb9kst said, I'm nearly positive they are common across the entire CF-18-19 series, and there are not a lot of other models which have keyboards with the same physical footprint. They have none of the old quirks for backlight power, so if it fits it will work.

CAP

Reply 4 : Part # for a CF-19 Rubber, Backlit Keyboard?

To be honest with you in why I need this information for this CF-19 Keyboard, and for my other post asking about the CF-30 Keyboard, is because I came across some extra Keyboards and I'd like to sell them on eBay. I want to give the correct information.

Reply 5 : Part # for a CF-19 Rubber, Backlit Keyboard?


Quote:








Originally Posted by Comptronic
View Post

I came across some extra Keyboards and I'd like to sell them on eBay.



Why not post them to the ToughBook Buy Sell and Trade Forum here first? That way you are advertising directly to the informed Toughbook users.

Reply 6 : Part # for a CF-19 Rubber, Backlit Keyboard?

Yes, ALL CF-19 keyboards will work on ALL CF-19's and ALL CF-18... If everyone would please direct your attention to the FAQ that would be GREAT



Sincerely,



Rob the slob

DELL XPS M1530

I've had my laptop for three years. I started getting the dreaded black screen, repair your computer or start windows normally. It never did "repair" itself and then one morning I couldn't get it to start period.

My question, can I take the hard-drive out and see if I can get any info off of it by hooking up as an external drive? I'm not under warranty!

Also is it possible to replace the hard drive? or is this just a waste of my money?


I need to purchase a new laptop, however with the track record Dell is having w/ problems who/what do you really suggest?

Waiting in Oregon....

Reply 1 : DELL XPS M1530

Yes, to both questions. Take out the old drive and put it into an external USB enclosure for SATA laptop drives, and in all likelihood you'll be able to recover the data.
And obviously, you can buy any standard SATA laptop drive to replace it. Then you'll need to reinstall the operating system, instructions here. If you did not receive an OS disc with your system, you can order replacement discs from this page.

Nvidia GT 540m Verde Driver Release Question

Apparently Nvidia released a driver today for the Geforce 540m card. Its one of their verde drivers that now official supports the 540m. I was wondering if its cool to install or should i just stick with the Dell updates? Has anyone tried it out yet?

Reply 1 : Nvidia GT 540m Verde Driver Release Question

Is this a new Beta version?



Or the official release of was has been in Beta testing?



Many users on these forums have been using Nvidia Beta version 270.xx drivers for about a month now its possible this is the completed version of those drivers.



I am unable to truly "surf" the web right now so unable to check myself as I am at work so anyone who knows would be good to know if you can see.

Reply 2 : Nvidia GT 540m Verde Driver Release Question

I too would appreciate any direction/experience people might be offered into the officially released 270.61, in particular to the XPS 15 L502X.

Reply 3 : Nvidia GT 540m Verde Driver Release Question


Quote:








Originally Posted by basic89
View Post

Is this a new Beta version?



Or the official release of was has been in Beta testing?



Many users on these forums have been using Nvidia Beta version 270.xx drivers for about a month now its possible this is the completed version of those drivers.



I am unable to truly "surf" the web right now so unable to check myself as I am at work so anyone who knows would be good to know if you can see.



270.61 WHQL

Reply 4 : Nvidia GT 540m Verde Driver Release Question


Quote:








Originally Posted by compwiz0620
View Post

270.61 WHQL



Just installed it, seems ok so far

Reply 5 : Nvidia GT 540m Verde Driver Release Question

On what system lamer01? Apparently there are some Dell's that need a BIOS upgrade: Recommended Software Update

Reply 6 : Nvidia GT 540m Verde Driver Release Question


Quote:








Originally Posted by Fionavar
View Post

On what system lamer01? Apparently there are some Dell's that need a BIOS upgrade: Recommended Software Update



Works fantastically well on the L502x with 525M on Bios A04

Reply 7 : Nvidia GT 540m Verde Driver Release Question

Thanks lamer01 - I will give it a try.

Reply 8 : Nvidia GT 540m Verde Driver Release Question

Just played dirt 2 with the new driver and bios A4. Everything seems fine. Game seems to play a little smoother. Fan seems to kick on a little more, but not much, and the gpu idles in the low 40's instead of the normal high 40's. This is with stock clocks.

Reply 9 : Nvidia GT 540m Verde Driver Release Question

Hey guys i just bought new Dell Xps 15 ( L502X) with 2Gb Nvdia 540 M GT.

I am having problem with scaling , there is no such option coming in Nvdia Control panel , when i launch NFS Most wanted or prince of persia , game just scale to half of screen , it do not fill the screen.

Any idea how to fix this in Xps 15 L502X ?

How can I wirelessly print?

Hello, I don't have wifi in my apartment, but I vaguely recall hearing of other ways to wirelessly print...bluetooth maybe? I have an HP Pavillion dv9000 and a Brother DCP-350C. Is the any way to do this? Thanks!

Reply 1 : How can I wirelessly print?

Check if the printer has an option for that. HOWEVER many try those wifi print servers. I tried that a few times and found it better to get a wifi printer.
Bob

my samsung tv has whit dots all over the screen

Samsung dlp 3-4 years old .Has this happened to anyone? I know my tv is out of warranty so I don't know what to do. Anyone have this problem? Each day I watch tv there are more white dots, I know soon the tv will all be white. This is crazy, tvs should last much longer. Please help

Reply 1 : my samsung tv has whit dots all over the screen

Hello, I'm so sorry to have to tell you this, but you are one of many (may I say ALL) owners of Samsung DLPs with ever-multiplying white dots on their screens. In most cases, Samsung will do nothing and calling their customer service dept. will only get you heartache and frustration. Read the other threads related to white dots in the Samsung forum and maybe try what other people have done to get this resolved. I (and many like me) have gotten nowhere and now have 2 and 3 year old TVs that will cost upwards of $500.00 to fix, which given the other inherent problems with these defective TVs, is not worth the money or time. They are junk and they have to be disposed of.

Sorry to be the bearer of such bad news but I just started experiencing this several weeks ago and I have already had enough of Samsung and will NEVER again contribute to their bottom line by purchasing anything they manufacture.

Reply 2 : my samsung tv has whit dots all over the screen

Thanks for the heads up, I just read through several similar posts and I can't believe how common a problem this is for Samsung and for them not to help and provide service to fix the defect. I fearless like i have been ripped off. If i knew when i bought my TV that the lifespan was 5 years or less i would've never purchased.

Reply 3 : my samsung tv has whit dots all over the screen

Mine has the same issue. It started out as one white dot and multiplied every day. I called Samsung (1-800 SAMSUNG) and spoke to customer service. They stated that this is a known issue for DLP TVs manufactured around 3-5 years ago in which there is a faulty DMD Board. They offered to send a service technician to my home to repair/replace the faulty part at no cost to me.

GX640 fan speed constantly changes - loud and annoying - help!

Hi all,



First post here. I searched through the threads and found some stuff that I thought would be helpful, but tried everything and I am still having this problem with my GX640-260US.



My laptop cooling fan constantly changes between medium and high even when I am just using the internet or word processing. It goes back and forth between medium and loud at random every 2-10 seconds. The fan will stay on high for a few seconds then drop back down. It does this constantly, even when I've stepped away from the computer for awhile and it's just sitting with the desktop and no applications open or running. It has done this since day one.



I am deployed in Iraq and we live in very close quarters. It drives me and my roommate crazy, especially when he is trying to read or enjoy quiet, and I don't blame him. It also makes it impossible to take it into meetings or use anywhere that is quiet. Everybody starts looking at me like what the hell am doing on my laptop that it is making such a racket.



The most recent thing I tried I got from a post here: using ATI overdrive, alter the profiles configuration file to underclock the GPU. I underclocked it all the way from 625 core/1000 memory to 400/500. It made no difference. Also, the manual fan control in ATI overdrive doesn't seem to make any difference either. Actually I don't even know if it's the GPU or CPU fan that is constantly switching and is so loud. I tried bios update, but MSI update utility says I have the most recent bios (American Megatrends 2.00.1201). I have the latest ATI driver, 11.2. My room is a constant 72 degrees and the laptop sits on a cooler master stand with more fans, so it's getting plenty of cool ambient air.



Is there anything I can do to stop this fan noise and the constant random speed switching every few seconds. It's driving me nuts!



Thanks.

Reply 1 : GX640 fan speed constantly changes - loud and annoying - help!

I would open up the back and repaste both the CPU and GPU. Try that and see if it doesnt help. Sounds like you have a bad paste job and its keeping the temps high and causing the fan to stay ramped up.

Reply 2 : GX640 fan speed constantly changes - loud and annoying - help!

go to the frostycomputers youtube channel it will show you how to repaste the CPU and do the same for the GPU.

Reply 3 : GX640 fan speed constantly changes - loud and annoying - help!

Lower the clocks even more. Idling GPU @100/150 should keep the cooler from constantly switching its speed.



I guess GPU temp is about 53 (Celsius), and this is a temperature where cooler enters the next 'faster' phase. If GPU is keeping the temps around this level, then the fan will be constantly increasing/decreasing speed.



Other thing is, if the fan is getting extremely loud (as this phase should only be at very high temps: more than 95 C). In this case, repasting GPU could be a viable solution.

Reply 4 : GX640 fan speed constantly changes - loud and annoying - help!

my room is full of fans. so i hardly hear anything from the laptop =) lol

Reply 5 : GX640 fan speed constantly changes - loud and annoying - help!

Had the same issue. Since last week, the fan had become unbearably loud. The computer was idling at 75C. Something was obviously not right.



I had a look inside and to my dismay, a complete repaste was in order. I also noticed that the thermal pads around the GPU were barely touching the memory modules because of the copper shim mod I did some months ago. Took off the pads, cleaned up everything with alcohol, repasted both CPU and GPU and screwed everything back into place. And then what? BAM, 46C idle. Furmark test after 10 minutes: 73C. Furmark (Extreme burning mode) + Prime95 running at once: 83C.



Doctor's advice: repaste that . It's worth it.

Reply 6 : GX640 fan speed constantly changes - loud and annoying - help!

Mine have been doing the same for about two weeks. I repasted the CPU and GPU with Arctic MX 4 but maybe I didn't it well because it didn't change anything about the noise. The temperature are still the same also I think. Right now, since powerplay is activated, I'm at 300/1000 with and idling aroung 51c. My computer is on a Zalman cooler but I doubt it runs at its full speed (I had to use a USB "divider" because of the lack of the GX640 ports).



The fan speed still changes a lot.



Now, maybe I should remove the thermal pads like Dakins did. Why not doing it also for the CPU pads?



Edit : I realised I put arctic silver 4 while it was arctic MX-4. Sorry.

Reply 7 : GX640 fan speed constantly changes - loud and annoying - help!


Quote:








Originally Posted by MonPireSire
View Post

Now, maybe I should remove the thermal pads like Dakins did. Why not doing it also for the CPU pads?



The reason I removed them is that the heatsink does not make proper contact with the GPU because of the thickness of the thermal pads for the RAM modules. Hence the use of a copper shim to compensate for that. I found out recently that copper shims provide terrible thermal conductivity, further contributing to the heat issue.



I did away with the copper shims and thermal pads completely, and now the heatsink sits flush with the GPU and the RAM modules. And also those grey blocks that are likely voltage regulators. The CPU side of things doesn't have that issue. Just make sure that you use good, non-electrically conductive compound.



You shouldn't have to use an external cooling fan, it's pretty ridiculous if it comes to that.

Reply 8 : GX640 fan speed constantly changes - loud and annoying - help!


Quote:








Originally Posted by Dakins
View Post

The reason I removed them is that the heatsink does not make proper contact with the GPU because of the thickness of the thermal pads for the RAM modules. Hence the use of a copper shim to compensate for that. I found out recently that copper shims provide terrible thermal conductivity, further contributing to the heat issue.



I did away with the copper shims and thermal pads completely, and now the heatsink sits flush with the GPU and the RAM modules. And also those grey blocks that are likely voltage regulators. The CPU side of things doesn't have that issue. Just make sure that you use good, non-electrically conductive compound.



You shouldn't have to use an external cooling fan, it's pretty ridiculous if it comes to that.





I only use this external fan at home ^^ (it gives me some extra USB port anyways + a nice slope.



Do you think you could take a picture of the inside of your computer? I'm so NOT SURE which pads you did remove...

Reply 9 : GX640 fan speed constantly changes - loud and annoying - help!

Thanks for all the replies! So it's the GPU after all. Mine idles at 56C, or at least when I am using email, word processor, and other light duty apps.



I will begin surgery on my laptop as soon as I have all the required tools and materials together. Let's see: Arctic Silver 4, alcohol, q-tips, screwdriver, and a steady hand. I used to build systems, so I am generally familiar with how to mount heatsinks and being gentle with the chips and all. Acrctic Silver 4 still the recommended paste?



One question though. From reading the posts, do I remove the thermal pads from the GPU *and* the system RAM *and* CPU? Ar ethere thermal pads on all of these that need to be removed and then do I just repaste everything back together without the pads? I wonder why they put the pads in there in the first place of they are so problematical?

HomeGroup, One down, rest still working

Computer one: laptop HP w/ AMD Turion 11 Ultra. Computer two: AMD Phenom 11 X4 955 both running Windows 7, 64 bit, Computer three: Intel E8400 , Computer four: Intel E7400, Computer five: EEEBox Atom N270, all running Windows 7, 32 bit. All part of a home group, home network. Computers one and five are wireless, computers two, three and four are hardwired. All through the same router. All was working fine. Have 32 bit printer connected to computer three which computers four and five could print to thru the network. Have 64 bit printer connected to printer two that all computers can print to thru the network. File sharing was working through all computers to all computers. Was running mulit-player game play through computers one, two and three as these were computers that have the games on them. Suddenly computer one was not showing itself on the network. Thru it could see the other computers on the network but could not open up their shared folders. The other computers can still see all the computers on the network and open up all the shared folders, even computer two that can't even see itself. LAN play between all the computers still works, even with computer two. What has happened to make computer two not see itself or able to open up the other computers it still sees on the network?

Reply 1 : HomeGroup, One down, rest still working

Even with 7, names and passwords still cause folk problems like this.

Reply 2 : HomeGroup, One down, rest still working

We did not set it up to use passwords and nothing was changed. We all have password protected sharing turned off.

Reply 3 : HomeGroup, One down, rest still working

Antivirus and firewall updates tend to break this. It's why I added a note about the firewall.

Defective 2 yr old TV

LN32A330J1D when first powered up the picture is fine. After anywhere from a few seconds to several minutes the picture blurs, skin tones fade to pink and faces seem to have a black outline around them.
Should I get a Sony or is this repairable for a reasonable price?
TIA

8760w officially announced (& 8460w, 8560w)

HP Fansite: http://hpfansite.com/hp-elitebook/hp...ions-official/



Engadget: HP rolls out EliteBook 8460w, 8560w and 8760w laptops for the business-minded -- Engadget



Clunkier design, 1920x1080... Powerful as kcuf!





EDIT: Sorry, apparently I didn't search hard enough. HP 8460w, 8560w and 8760w official?!



Close as needed...

Thứ Ba, 19 tháng 4, 2011

XPS 15 "Delivery Preperation"

My order has been in Delivery Preparation since Saturday. I wonder how much longer until it actually ships? I have next day shipping. Can't wait...

Reply 1 : XPS 15 "Delivery Preperation"

That's an awful long time to put the laptop in a box and print an address label. ;-)



I ordered my XPS 15 on Friday and have an EDD of 5/5. I feel like I did in high school when I had concert tickets for my favorite band and the concert was not until the following month.



I hope you enjoy your lappy and will write about it in the owner's forum.

Reply 2 : XPS 15 "Delivery Preperation"

Yep it now shows shipped, I have never been so OCD about anything. I'm relieved.

Reply 3 : XPS 15 "Delivery Preperation"


Quote:








Originally Posted by scott5626
View Post

Yep it now shows shipped, I have never been so OCD about anything. I'm relieved.



Congratulations! I know exactly what you mean about being OCD. Mine has an EDD of 5/5, and yet I'm checking the website constantly for changes in the status. I need help.

Reply 4 : XPS 15 "Delivery Preperation"


Quote:








Originally Posted by Ton-80
View Post

Congratulations! I know exactly what you mean about being OCD. Mine has an EDD of 5/5, and yet I'm checking the website constantly for changes in the status. I need help.







Quote:








Originally Posted by scott5626
View Post

Yep it now shows shipped, I have never been so OCD about anything. I'm relieved.



Congratulation @ scott5626 . Ever since I placed my order on 3/31 I have been like totally OCD,checking the status page and after about 10 days the manufacturing build was complete and got shipped 4/12(what a relief) on express delivery, but due to state elections here on 4/13 the laptop is yet to be delivered , just hoping to get it today

Reply 5 : XPS 15 "Delivery Preperation"

I just ordered my XPS 15 just after midnight PST Tues, 4/12. Considering it's only been two days, with an EDD of 5/16, I've checked a ridiculous number of times. The funny thing is that the account summary page has changed order status to "Delivery Preparation" as of last night (Weds 4/13)! When I click on the order to see the full order page, it still shows "In Production," but if I click on those words, it lists out all the possible states and "Delivery Preparation" doesn't exist--it goes from "In Production" to "Shipped".



I was just searching on "Delivery Preparation" and found this. Wanted to share my experience for others to see examples. I will keep the thread updated as to what happens... Maybe I got lucky and got someone's order cancellation?!

Reply 6 : XPS 15 "Delivery Preperation"


Quote:








Originally Posted by cw76
View Post

I just ordered my XPS 15 just after midnight PST Tues, 4/12. Considering it's only been two days, with an EDD of 5/16, I've checked a ridiculous number of times. The funny thing is that the account summary page has changed order status to "Delivery Preparation" as of last night (Weds 4/13)! When I click on the order to see the full order page, it still shows "In Production," but if I click on those words, it lists out all the possible states and "Delivery Preparation" doesn't exist--it goes from "In Production" to "Shipped".



My status also changed to "Delivery Preparation" today, but I ordered mine back on the 8th. Same thing happened to me when I clicked the link for order details: that page says "In Production."



I called Dell to find out what "Delivery Preparation" means and how long it will be until I get my computer. At first, the rep insisted that the info on the order details page is all he knows. Then, he put me on hold when I kept pressing, and when he came back, he told me that my machine was going into testing.



I believe testing is the final stage before boxing, and based on Scott5626's experience, I'm expecting this "Delivery Preparation" stage to take about three days. If that is the case, I should receive the beast long before the 5/5 EDD.